 |
USB/RS-232 programmable power supplies 9 models found.
|
| Single output power supply with RS232 (0-32V, 0-3A) |
| Model# BK9120A
|
- RS-232 interface (optional USB)
- 10mV / 1mA display resolution
- Over voltage protection and remote sensing
- Excellent regulation and very low noise
- SCPI compatible
- Fast transient response time
- Closed case calibration
|
| Single output power supply with RS232 (0-20V, 0-5A) |
| Model# BK9121A
|
- RS-232 interface (optional USB)
- 10mV / 1mA display resolution
- Over voltage protection and remote sensing
- Excellent regulation and very low noise
- SCPI compatible
- Fast transient response time
- Closed case calibration
|
| Single output power supply with RS232 (0-60V, 0-2,5A) |
| Model# BK9122A
|
The 9122A is a laboratory grade, 0-60V/0-2.5A programmable DC Power Supply providing great performance and features not found in other supplies in this price category. The power supply was designed to meet the needs of today's applications in R&D design verification, production testing or university labs that require clean and reliable power, high resolution/accuracy and fast transient response time.
- Excellent display resolution
- Fast transient response time (<20ms)
- SCPI compatible
- Communicate via RS232 interface using the included RS232 to TTL Serial Converter cable. USB communication is optional and requires a USB to TTL Serial Converter cable (order IT-E132)
- Closed case calibration
- Compact size for bench use or rack mountable (2U x 1/2U size)
- DVM and Milliohm Meter
- Discrete Fault Indicator/Remote Inhibit (DFI/RI). Useful for turning multiple power supplies On/Off simultaneously
- Application Software for front panel emulation and simple test sequence generation included
- Sheathed banana plug terminals for safety
|
| Single output power supply with RS232 (0-72V, 0-1.2A) |
| Model# BK9124
|
The 9124 is a laboratory grade, 0-72V/0-1.2A programmable DC Power Supply providing great performance and features not found in other supplies in this price category. The power supply was designed to meet the needs of today’s applications in R&D design verification, production testing or university labs that require clean and reliable power, high resolution/accuracy and fast transient response time.
- Excellent display resolution
- Fast transient response time (<20ms)
- SCPI compatible
- RS232 interface (standard), USB optional
- Closed case calibration
- Compact size for bench use or rack mountable (2U x 1/2U size)
- DVM and Miliohm meter
- Discrete Fault Indicator/Remote Inhibit (DFI/RI). Useful for turning multiple power supplies On/Off simultaneously
- Application Software for front panel emulation and simple test sequence generation included
- Sheathed banana plug terminals for safety
|
| Triple output programmable power supply 2 x 0-30V/0-3A and 0-5V/0-3A |
| Model# BK9130
|
The 9130 is a fully programmable triple output DC Power Supply delivering 0-30V/0-3A on 2 outputs and 0-5V/0-3A on 1 output. Each output is fully floating and outputs can be adjusted independently or connected in series or parallel to produce higher voltages or currents. The 9130 is ideally suited for applications in Electronic Test, Production and Service, where multiple independent DC supplies are required and bench space is at a premium. - 3 independent, fully programmable and electrically isolated outputs
- Display & adjust Voltage and Current settings for all 3 channels simultaneously
- Flexible output configuration: Operate in series or parallel tracking mode
- SCPI compatible command set. Communicate via USB interface using the included USB to TTL Serial Converter cable
- RS232 interface cable, converting from RS232 to TTL, is optional (order IT-131)
- OVP (Over Voltage) and OTP (Over Temperature) protection
- Output on/off control
- Excellent stability and regulation
- Very compact foot print (rack mountable 2U x 1/2U)
- Application Software for front panel emulation and simple test sequence generation included
- 50 memory locations for instrument state storage & recall
|
| 5.2V/60A Programmable DC Power Supply |
| Model# BK9150
|
The 9150 is a high performance linear-regulated 5.2V/60A programmable DC power supply that provides excellent performance and features not found in other supplies in this price category. This power supply was designed for applications in design verification, production or university labs that require high yet clean and reliable power, combined with excellent resolution, accuracy and fast transient response time.
- Very low ripple and noise due to linear regulation
- Excellent display resolution
- Fast transient response time (<100 µs)
- Programmable via USB and RS232 using SCPI compatible command set
- Closed case calibration
- List mode operation for increased throughput
- Very quiet due to intelligent fan speed control
- For bench use or rack mountable
- Application Software for front panel emulation and simple test sequence generation included
- Digital port with Remote Inhibit (RI) useful for turning multiple power supplies On/Off simultaneously
- Over voltage protection
- Digital Volt Meter and Milliohm Meter
|
| 20V/27A Programmable DC Power Supply |
| Model# BK9151
|
The 9151 is a high performance linear-regulated 20V/27A programmable DC power supply that provides excellent performance and features not found in other supplies in this price category. This power supply was designed for applications in design verification, production or university labs that require high yet clean and reliable power, combined with excellent resolution, accuracy and fast transient response time.
- Very low ripple and noise due to linear regulation
- Excellent display resolution
- Fast transient response time (<120 µs)
- Programmable via USB and RS232 using SCPI compatible command set
- Closed case calibration
- List mode operation for increased throughput
- Very quiet due to intelligent fan speed control
- For bench use or rack mountable
- Application Software for front panel emulation and simple test sequence generation included
- Digital port with Remote Inhibit (RI) useful for turning multiple power supplies On/Off simultaneously
- Over voltage protection
Digital Volt Meter and Milliohm Meter
|
| 30V/18A Programmable DC Power Supply |
| Model# BK9152
|
The 9152 is a high performance linear-regulated 30V/18A programmable DC power supply that provides excellent performance and features not found in other supplies in this price category. This power supply was designed for applications in design verification, production or university labs that require high yet clean and reliable power, combined with excellent resolution, accuracy and fast transient response time.
- Very low ripple and noise due to linear regulation
- Excellent display resolution
- Fast transient response time (<100 µs)
- Programmable via USB and RS232 using SCPI compatible command set
- Closed case calibration
- List mode operation for increased throughput
- Very quiet due to intelligent fan speed control
- For bench use or rack mountable
- Application Software for front panel emulation and simple test sequence generation included
- Digital port with Remote Inhibit (RI) useful for turning multiple power supplies On/Off simultaneously
- Over voltage protection
- Digital Volt Meter and Milliohm Meter
|
| 60V/9A Programmable DC Power Supply |
| Model# BK9153
|
The 9153 is a high performance linear-regulated 60V/9A programmable DC power supply that provides excellent performance and features not found in other supplies in this price category. This power supply was designed for applications in design verification, production or university labs that require high yet clean and reliable power, combined with excellent resolution, accuracy and fast transient response time.
- Very low ripple and noise due to linear regulation
- Excellent display resolution
- Fast transient response time (<50 µs)
- Programmable via USB and RS232 using SCPI compatible command set
- Closed case calibration
- List mode operation for increased throughput
- Very quiet due to intelligent fan speed control
- For bench use or rack mountable
- Application Software for front panel emulation and simple test sequence generation included
- Digital port with Remote Inhibit (RI) useful for turning multiple power supplies On/Off simultaneously
- Over voltage protection
- Digital Volt Meter and Milliohm Meter
|
|
