Shunt 0.01 ohm 0.5% 30A max
Modèle 207030301
1 an(s) de garantie
- Shunt avec sorties sur bornes (utilisation basse tension)
- 0.01ohm / 0.5% et 30A max
-
Adaptateur allume cigare
Modèle 978361000
Adaptateur permettant la recharge des mesureurs de champ dans une voiture (compatible avec tous les mesureurs de champ SEFRAM)
-
USB-to-GPIB Adapter
Modèle AK40G
The AK40G USB-to-GPIB adapter provides GPIB connectivity through the front USB host port on 4050 & 4060 series generators and some digital storage oscilloscopes. The GPIB and USB connectors conform to IEEE488.2 and USB 2.0 respectively.
- Powered through USB host connector
- Cable length approximately 56 inches (143cm)
- Communication Status LED and Power LED indicators
- GPIB interface supports Device mode only (not Controller mode)
-
General Purpose Function Generator Kit
Modèle CC510
Model CC510 General Purpose Function Generator Kit provides a range of BNC and N Type coaxial interconnection for basic function / arbitrary waveform generators use. All components feature standard BNC or N Type interfaces with 50 ohm impedance and gold plated center contacts to ensure accurate repeatable measurements. The kit is provided in a convenient foam lined storage case for easy selection and use.
Features:
- BNC & N Type 50 ohm Connectors
- Gold plated center contacts
- Storage case
Applications:
- Production Test Stations
- Service & Repair Facilities
- Educational Test Benches
-
Pouch
Modèle SC518
- Pouch for voltage tester
- Belt clip
- Optimized size: designed for voltage tester
-
30A Hook-up Cable Set
Modèle TL 30
30 Amp test leads that are ideal for bench power supply applications that require clip termination such as battery charging. Note that the spade lug connector will not connect to power supplies with banana only jacks. The power supply must have a treaded binding post.
- #10 Spade Lug to Large Battery Clips (Crocodile)
- 30A rating
- Black and Red pair
- 30" (0.75m) length
-
Power Supply Test Leads Set
Modèle TLPS
This accessory kit combines safety and functionality. A must have for anyone who uses power supplies or loads.
- Medium and large insulated alligator clips
- Black and red components
- Sense lead included
Description Max current Red and black test lead (120 cm) 25 A Spade lug adapters (6 & 4 mm) 36 A Standard alligator clips 3 A 4 mmBanana plug adapters 36 A Large insulated alligator clips 36 A Red and black sense leads (10 cm) 3 A -
Cordon de test pour fort courant
Modèle TLPWR1
Câble rouge et noir de haute qualité dans gaine tressée équipés de connecteurs plats à fourche pour alimentations et charges électroniques.
- Longueur: 2 m
- Courant nominal : 60 A
- Diamètre intérieur du connecteur : 8 mm (approximatif)
- Largeur extérieure du connecteur : 15 mm (approximatif)
- Matériau du fil : silicone