30MHz Dual Channel Function/Arbitrary Waveform Generators

Model BK4054B

3 Year Warranty

The 4050B Series Dual Channel Function/Arbitrary Waveform Generators are capable of generating stable and precise sine, square, triangle, pulse, and arbitrary waveforms. With an easy-to-read color display and intuitive user interface with numeric keypad, these instruments offer plenty of features including linear/logarithmic sweep, built-in counter, extensive modulation and triggering capabilities, a continuously variable DC offset, and a high performance 14-bit, 150 MSa/s arbitrary waveform generator. CH1 and CH2 outputs can both be varied from 0 to 10 Vpp into 50 ohms (up to 20 Vpp into open circuit).

  • 14-bit, 150 MSa/s, 16k point arbitrary waveform generator
  • Two independent channels with individual output On/Off buttons
  • Convenient channel copy, track and combine functions
  • Synchronize the phase of both channels with the push of a button
  • Low-jitter square wave generation for simulating reliable clock signals, generating triggers, or validating serial data buses
  • Large 4.3-inch LCD color display
  • AM/DSB-AM/ASK/FM/FSK/PM/PSK/PWM modulation functions
  • Variable DC offset and adjustable duty cycle
  • Internal/external triggering
  • Gate and burst mode
  • 196 built-in predefined arbitrary waveforms
  • Built-in frequency counter
  • Harmonics generator function
  • LAN, USB device port (USBTMC-compliant), and front panel USB host port
  • GPIB connectivity with optional USB-to-GPIB adapter
  • PC software provided for arbitrary waveform editing
  • Short circuit output protection
  • LabVIEW drivers available

Software

Note/Description Version File Link
Operating Software (Supports Windows(R) XP/Vista/7) 1.1.1.36 4050B_Series_software.zip
LabVIEW Drivers 2016 1.0.0 LV4050B.zip
USBTMC Driver Installation Note - Note d'installation des drivers 1.0 USBTMC_Driver_Readme.txt
  • USB-to-GPIB Adapter

    Model AK40G

    The AK40G USB-to-GPIB adapter provides GPIB connectivity through the front USB host port on 4050 & 4060 series generators and some digital storage oscilloscopes. The GPIB and USB connectors conform to IEEE488.2 and USB 2.0 respectively.

    • Powered through USB host connector
    • Cable length approximately 56 inches (143cm)
    • Communication Status LED and Power LED indicators
    • GPIB interface supports Device mode only (not Controller mode)
  • BNC Breakout to Alligator Clips

    Model CC-21

    Standard BNC to Alligator clips test leads.

    • 50 ohm impedance
    • RG58C/u cable
    • 500Vrms voltage rating
    • 40" cable length
  • General Purpose Function Generator Kit

    Model CC510

    Model CC510 General Purpose Function Generator Kit provides a range of BNC and N Type coaxial interconnection for basic function / arbitrary waveform generators use. All components feature standard BNC or N Type interfaces with 50 ohm impedance and gold plated center contacts to ensure accurate repeatable measurements. The kit is provided in a convenient foam lined storage case for easy selection and use.

    Features:

    • BNC & N Type 50 ohm Connectors
    • Gold plated center contacts
    • Storage case
    •  

    Applications:

    • Production Test Stations
    • Service & Repair Facilities
    • Educational Test Benches
  • Function Generator Test Leads Set

    Model TLFG

    General purpose test probe set that includes BNC to BNC cables, BNC adapters and test clips.