80MHz Dual Channel Function/Arbitrary Waveform Generators
Model BK4063B
3 Year Warranty
The 4060B Series Dual Channel Function/Arbitrary Waveform Generators are capable of generating stable and precise sine, square, triangle, pulse, and arbitrary waveforms. This series combines the cost saving benefits of DDS and true point-by-point arbitrary architectures to meet a wide range of applications that require high signal fidelity and low jitter arbitrary waveforms.
With an easy-to-read color display and intuitive user interface with numeric keypad, these instruments offer plenty of features including linear/logarithmic sweep, burst mode, and variable DC offset. Generate custom arbitrary waveforms using the included application software, or select from the 196 built-in arbitrary waveforms.
- 300 MSa/s (DDS), 75 MSa/s (true point-by-point) arbitrary waveform generator
- Up to 1.2 GSa/s sample rate for sine, square, triangle, and pulse waveforms
- 16-bit resolution, 8 Mpt arbitrary waveform length
- Two independent channels with one button phase synchronization
- Channel copy, track, and waveform combine functions
- 4.3-inch touch screen display
- Linear and logarithmic sweep
- AM/DSB-AM/FM/PM/PSK/FSK/ASK and PWM modulation types
- Variable DC offset
- Overvoltage protection
- Internal/external triggering
- Gate and burst mode
- 196 built-in predefined arbitrary waveforms
- Frequency counter
- LAN and USB device (USBTMC-compliant) with front panel USB host port
- GPIB connectivity with optional USB-to-GPIB adapter (model AK40G)
- LabVIEW drivers available
Documentation
Software
Note/Description | Version | File Link |
---|---|---|
Logiciel Externe / Operating Software (Supports Windows (R) 7 and newer) | 1.1.1.38R1 | 4060B_Series_Software.zip |
1.0.0 | LabVIEW 20 | LV4060B.zip |
USBTMC Driver Installation Note - Note d'installation des drivers | 1.0 | USBTMC_Driver_Readme.txt |
-
USB-to-GPIB Adapter
Model AK40G
The AK40G USB-to-GPIB adapter provides GPIB connectivity through the front USB host port on 4050 & 4060 series generators and some digital storage oscilloscopes. The GPIB and USB connectors conform to IEEE488.2 and USB 2.0 respectively.
- Powered through USB host connector
- Cable length approximately 56 inches (143cm)
- Communication Status LED and Power LED indicators
- GPIB interface supports Device mode only (not Controller mode)
-
General Purpose Function Generator Kit
Model CC510
Model CC510 General Purpose Function Generator Kit provides a range of BNC and N Type coaxial interconnection for basic function / arbitrary waveform generators use. All components feature standard BNC or N Type interfaces with 50 ohm impedance and gold plated center contacts to ensure accurate repeatable measurements. The kit is provided in a convenient foam lined storage case for easy selection and use.
Features:
- BNC & N Type 50 ohm Connectors
- Gold plated center contacts
- Storage case
Applications:
- Production Test Stations
- Service & Repair Facilities
- Educational Test Benches