2.1 GHz Spectrum Analyzer
Model BK2682
3 Year Warranty
The BK2682 is a spectrum analyzer that delivers performance and functionality in frequency ranges from 9 kHz to 2.1 GHz. This model offers a standard pre-amplifier, tracking generator, and 1 Hz minimum RBW. The included advanced measurements give the user access to even more powerful features. In addition, this analyzer provides low phase noise and displayed average noise level (DANL) to view critical detail in the spectrum which is beautifully displayed on the 10.1” widescreen color display. The reflection measurement option enables VSWR, reflection coefficient, and return loss measurements, while the EMI pre-compliance option enables pre-defined bandwidth set points and quasi-peak detection. This analyzer is ideal for applications in 2-way radio, site surveying, EMI pre-compliance, characterizing the frequency response of RF devices and more.
- Frequency range: 9 kHz to 2.1 GHz
- High Sensitivity -161 dBm/Hz displayed average noise level (DANL)
- Low phase noise of -98 dBc/Hz @ 10 kHz offset
- Low level uncertainty of ±0.7 dB
- 1 Hz minimum resolution bandwidth (RBW)
- Preamplifier and tracking generator standard
- 10.1” wide-screen 1024 x 600 color display
- LAN and USBTMC connectivity
- USB host port to store and recall waveform data, setups, and screen captures
Documentation
Software
Note/Description | Version | File Link |
---|---|---|
PC software / Logiciel d'exploitation (Windows7/8.1/10) | 1.0.5.0 | 2680_Series_Software.zip |
USBTMC Driver Installation Note - Note d'installation des drivers | 1.0 | USBTMC_Driver_Readme.txt |
-
Near Field Probe Kit
Model PR262
The PR262 near field probe kit includes both magnetic (H) and electric (E) field probes to help identify sources of electromagnetic radiation. The probes act similar to wide bandwidth antennas and are usually connected to a spectrum analyzer. The probes can also be used in immunity testing by feeding an RF signal into the probe and radiating it into the circuit. The wideband amplifier can be connected between the probe and the spectrum analyzer to increase the dynamic range of the measurements.
- H20 H-Field
- H10 H-Field
- H5 H-Field
- E5 E-Field
- 40 dB wideband amplifier
- SMB to SMA cable
- SMA to N cable
Contents
-
Reflection bridge with adapters
Model RB2680
The RB2680 reflection bridge is used with a spectrum analyzer to measure VSWR, reflection coefficient or return loss. The kit includes 2 N(M) to N(M) adapters to connect to the spectrum analyzer ports.
- Frequency range 1 MHz to 2 GHz
- N (Female) type connector
- 50 Ω Impedance
- 5 dB Insertion loss
- 20 dB directivity